Jute VOT Bag
Vegetable-oil-treated jute sacks for commodity packaging where VOT processing forms part of the buyer's specification. Select the construction and testing requirements for the actual contents and contact arrangement.
- Vegetable oil treatment specified for the order
- Sack construction, size, and empty weight agreed separately
- Direct-contact and liner requirements reviewed for the commodity
- Testing and acceptance criteria defined before production
- Printing and bale packing matched to the approved specification
A jute VOT bag is a woven sack produced with vegetable oil treatment specified as part of its processing requirements. VOT describes the treatment, while names such as B-Twill, Binola, Double Warp, and Hessian describe different bag constructions. Buyers should define both the treatment and the physical sack specification before comparing quotations.
For coffee, cocoa, nut, grain, and other commodity buyers, the intended contents and contact arrangement determine the acceptance requirements. Vegetable oil treatment does not independently establish food-contact compliance, a particular test result, or suitability for every commodity.
Jute VOT Bag Features
Jute VOT bag features combine a defined processing requirement with the construction needed for bulk commodity handling. Review dimensions, weave, seams, and treatment documentation together so the finished bag matches the buyer's product-contact and shipment requirements.
- Vegetable oil treatment included in the agreed processing specification.
- Woven jute exterior selected for the actual commodity.
- Choice of construction assessed independently from treatment.
- Printing, liners, and closure reviewed as parts of the complete package.
- Order-specific testing and acceptance criteria established before production.
Jute VOT Bag Specifications
The following VOT B-Twill configuration is one commercially traded option for bulk commodity packaging. Confirm the final construction, filling requirement, treatment, testing, and packing with Premium Jute against the approved sample and purchase specification.
| Specification | Details |
|---|---|
| Product | Jute VOT Bag |
| Outer fabric composition | 100% jute |
| Treatment | Vegetable oil treated, VOT |
| Commercial construction | B-Twill |
| Fabric construction | Woven twill sacking |
| Bag dimensions, length × width | Approximately 111.8 × 67.3 cm |
| Equivalent dimensions | 44 × 26.5 inches |
| Empty bag weight | Approximately 1,020 g |
| Weave designation | 6 × 8 porter and shot |
| Mouth finish | Hemmed |
| Stitching | Overhead dry sewn |
| Nominal commercial filling category | 100 kg; confirm for the actual commodity and handling process |
| Commercial bale configuration | 300 empty sacks; confirm final packing |
These values describe a particular VOT B-Twill configuration. Other VOT constructions can have different dimensions, bag weights, weave, seams, and packing quantities.
What Vegetable Oil Treatment Means
Vegetable oil treatment identifies a processing requirement for the jute rather than an additional waterproof layer. It should be recorded separately from fabric construction, colour, printing, liner, and closure.
Ask for the treatment requirement to be stated clearly in the quotation and purchase specification. If the buyer also requires JBO-free processing, mineral-oil restrictions, odour limits, or other conditions, record each requirement explicitly.
Do not treat VOT, hydrocarbon-free, and food grade as interchangeable claims. Any stated chemical limit or test result needs evidence for the relevant product and agreed scope.
Selecting the Bag Construction
Choose the sack around the commodity, filling weight, particle size, and handling method. A treatment requirement does not determine the dimensions or safe filling load of the finished bag.
Compare empty weight, weave designation, seam design, mouth finish, and usable filling volume. Review the complete specification when replacing an existing bag rather than selecting from the VOT name alone.
For smaller particles or products requiring a barrier, assess an appropriate inner package. Woven jute does not become airtight or waterproof simply because vegetable oil treatment has been specified.
Food-Contact and Testing Requirements
State whether the contents will touch the jute directly or remain inside a liner. Review fabric processing, inks, thread, liner materials, and other relevant components for that contact arrangement and destination.
Where chemical testing is required, agree on the substances or fractions to be measured, method, acceptance limits, sampling, and report requirements. A general VOT label does not replace the buyer's actual test specification.
Any laboratory report should identify the tested material and provide enough traceability for the agreed purpose. Do not assume a result for another sack or production sample automatically covers the complete order.
Commodity Uses and Packaging Compatibility
VOT jute sacks are considered for commodities including coffee, cocoa, nuts, and grains where treatment forms part of the buyer's packaging requirements. Suitability still depends on the actual construction, cleanliness, seams, and product-contact conditions.
Assess each commodity separately when particle size, moisture protection, aroma retention, or handling requirements change. Approve a complete sample with any liner and closure rather than the outer fabric alone.
Printing and Shipping Marks
Submit approved artwork showing the commodity description, net weight, lot identification, consignee details, and shipping marks. Confirm colours, print size, position, and readability on the selected fabric.
Printing requirements should be reviewed within the intended food-contact and odour scope. Certification or compliance markings should be used only where supported and authorized for the relevant product.
Quality Checks Before Shipment
Inspect the finished bags against the written specification and approved sample. Relevant checks include:
- Bag dimensions, empty weight, and weave construction
- Fabric defects, cleanliness, and odour criteria
- Mouth finish and seam consistency
- Treatment records and agreed testing documents
- Liner fit and integrity where included
- Artwork accuracy, bag count, and bale identification
Include filling and handling trials where package performance needs assessment. Agree on inspection tolerances and any third-party checks before production begins.
Bale Packing and Storage
Confirm bags per bale, wrapping, binding, and shipment identification against the selected construction. Container loading depends on final bale dimensions and the loading plan.
Keep empty bags dry, clean, and separated from fuels, chemicals, and strongly scented goods. Specified treatment does not remove the need to control contamination during storage and transport.
Frequently Asked Questions
These answers clarify common VOT purchasing terms. The final treatment and physical bag specification should be agreed together for the actual commodity.
Is VOT a type of weave?
No. VOT means vegetable oil treated and describes a processing requirement. B-Twill, Binola, Double Warp, and Hessian describe different constructions.
Does VOT automatically mean food grade?
No. Food-contact suitability depends on the actual materials, processing, intended contact, and applicable buyer requirements, supported by the necessary documentation.
Are VOT jute bags waterproof?
No. Vegetable oil treatment does not make a woven sack a waterproof barrier. Specify a suitable liner or other barrier system where required.
Does VOT guarantee a hydrocarbon test result?
No. Required substances, test methods, acceptance limits, and sampling must be agreed and verified for the relevant material or order.
Request a Bulk Order Quote
Send Premium Jute the commodity, construction, dimensions, filling weight, quantity, and destination. Include the required treatment, testing criteria, liner, printing, and inspection details so the quotation covers the complete VOT sack specification.